The TARUS PMT is a Fixed Portal, Moving Table Machining Center. Intended uses are Contour Milling of Stamping Dies, Injection Molds, Assembly Fixtures and other Automotive and Aerospace Tooling.

The PMT-C is equipped with the TARUS 2 Axis Clamping Angle Head. Range is 0-90º degrees in the A axis and 360º in the C Axis. Spindle angle is clamped with springs and unclamped hydraulically for rotation via the servo motors. A seamless ring induction scale is fit directly to the rotating axes. The Clamping Heads 50 Taper Spindle is a directly driven by a water cooled Synchronous motor, 0-10,000 rpm, 29 kW, 176 Nm peak.

The PMT-5 is equipped with a Fork Style 2 Axis Milling Head for full 5 axis milling. Torque motors coupled to 2 stage gear reduction a provide huge positioning and holding force for the A and C axes. A seamless ring induction scale is fit directly to the rotating axes. Spindle is an HSK A63, 0-15,000 rpm, 40 kW, 160Nm peak torque.

The PMT-5-K is equipped with the Kessler 2AK-G3 Direct Drive Fork Style Milling Head with Hydraulic Clamping and Cartridge Spindle, HSKA63 0-18,000 RPM.
Other options include a variety of ATC, Enclosure, Flood Coolant, Conveyors, Probing and Tool Pre-setter.

Brochure for TARUS PMT Range

  • P1010011
  • P1010014
  • P1010015
  • Ball Screw
  • P1010012