The TARUS TBM is a Moving Gantry Machining Center. Intended uses are Finish Contour Milling of Injection Molds, General Contour Milling of Aluminum and Plastic Automotive and Aerospace Tooling and Models.

All axes are driven by TARUS’ integrated Torque Motor Ballnut.

The TBM-C is equipped with the TARUS 2 Axis Clamping Angle Head. Range is 0-90º degrees in the A axis and 360º in the C Axis. Spindle angle is clamped with springs and unclamped hydraulically for rotation via the servo motors. A seamless ring induction scale is fit directly to the rotating axes. The Clamping Heads 50 Taper Spindle is a directly driven by a water cooled Synchronous motor, 0-10,000 rpm, 29 kW, 176 Nm peak.

The TBM5-5 is equipped with a Fork Style 2 Axis Milling Head for full 5 axis milling. Torque motors coupled to 2 stage gear reduction a provide huge positioning and holding force for the A and C axes. A seamless ring induction scale is fit directly to the rotating axes. Spindle is an HSK A63, 0-15,000 rpm, 40 kW, 160Nm peak torque.

The TMB-5K is equipped with the Kessler 2AK-G3 Direct Drive Fork Style Milling Head with Hydraulic Clamping and Cartridge Spindle, HSKA63 0-18,000 RPM.

Other options include a variety of ATC, Enclosure, Flood Coolant, Conveyors, Probing and Tool Pre-setter.

Brochure for the TBM Range of Machines

  • Tarus TBM5
  • TBM5_Render
  • TBM5 SIDE
  • TBM5 FRONT
  • TBM5 ISO RIGHT
  • TBM5